Adam Polish Graphene Spray Coating

System X Car Polish Services uses Adam polish Graphene spray coating advanced using Adam’s UV Flashlight and our patent-pending UV Tracer Technology Ceramic Spray Coating. Compared to the original Ceramic Spray Coating, the Graphene variant will be found to have some improved characteristics and shows high performance than earlier variant. Adam polish Graphene spray coating advanced is appropriate to add long-lasting, extreme self-cleaning effects for single-stage and clear-coated, painted surfaces, glass, plastic trim, polycarbonate, rubber moulding, and wheels with a single bottle.

  • Less prone to water spotting.
  • Higher stain resistance against, saps,, bugs droppings, etc.
  • Higher scratch resistance during regular washing process.
  • Easier to apply than previous Adam Polish Ceramic Coatings.
  • Increased clarity and depth to all surfaces.
  • Sliding angle is less with water evacuating at angles less than 10 to 15 degree.
  • Higher contact angles averaging 110-118°.
  • UV Tracing Technology patent.
  • >9H Hardness, 1 plus years or more of Paint Protection
  • This can be applied directly on all Painted Surfaces, Headlights, Glass, Chrome, Wheels, Trim, and even Bed Liners!

Warning – Do Not Smell

Adam Polish Graphene Ceramic Spray Coating is an easy to use Ceramic paint protection Coating that can be applied easy on your car or suv. Adam Polish Graphene Ceramic Spray coating is a great stand alone product or topper for your current Adam Ceramic paint protection coating. Adam Polish Graphene Ceramic Spray Coating is combined with enriched gloss, extreme hydrophobic properties and protection for the your car paint.  Adam Polish Graphene Ceramic Coating which is usually applied by spraying and wiping on the your car paint.  Adam Polish Ceramic UV Glow Technology and bridges the gap between a professional coated area and uncoated area.


Procedure for the installation:-

  1. As with any Ceramic Coating, preparation is key point in the installation of the ceramic coating. It is always advisable to use Adam’s Clay Bar to remove contamination, oxidation, swirls/scratches for optimal results.
  2. Maximize protection by using Adam’s Surface Prep to remove any surface oils, or residues.
  3. Spray Adam’s Graphene Ceramic Spray Coating into a Microfiber Applicator, or an Adam’s Premium Microfiber Towel.
  4. Wipe the product onto the painted surface of the car so that it will allow the surface to be fully covered.
  5. Allow the product to sit for 1-2 minutes.
  6. After this always buff the surface using Adam’s Premium Microfiber Towel to have a high glossy shine.
  7. Allow 4 -5 hours to cure before exposure to environmental elements.

Frequently Asked Questions

“How many layers you can apply on the painted surface?”

You can apply maximum of 2 layers which will protect the painted surface and will shows the same hydrophobic properties.

“What is Ceramic Glow Technology?”

Adam’s Polishes Patent technology is Ceramic Glow Technology. This is crystalline form of an optical brightener that will absorbs energy and emits light as it relaxes back down to a lower energy.

“What’s the difference between fluorescence and phosphorescence?”

Length of time that the light is emitted. In another way the amount of time it takes for the electrons to relax and release energy in the form of light or photons.

“Does the UV light act as a durability indicator for the coating?”

No, it doesn’t. This is currently offered as visual aid for us to confirm whether the area is coated or not. Lack of glow shows that this area is not coated with the paint protection.

“Will my car glow blue in the sunlight?”

No, because this Graphene coating is completely invisible and clear under standard light. The coating will only glow a bluish light under the 395 NM UV light.



“Will my car glow blue in the sunlight?”

No, because this Graphene coating is completely invisible and clear under standard light. The coating will only glow a bluish light under the 395 NM UV light.


“Can I top this UV coating over top of any Ceramic Coating?”

YYes, this product can be used over the top of any branded Ceramic Coating. The top most layer of the paint protection coating will glow as the light will reflect and exciting top layer.

“Will this coating glow after being “charged” with the UV light?”

No, since this coating is fluorescent and not phosphorescent, it will excite and glow only when the light is shone. Contrarily, “glow in the dark” items have a yellow/greenish hue from phosphorescent dyes– these slowly become excited under any light and will diminish over the course of a few minutes.

“How can I use this on? Can I just spray the whole car with this bottle?”

Adam’s Graphene Ceramic Spray Coating provides protection to all areas of your vehicle. Painted surfaces, Glass, Wheels, Plastic trim, Bed liners, Headlights Tonneau covers, Canvas tops, Floor mats, Unfinished metal are safe after coated. We strongly recommend that you go panel by panel to ensure coating is properly applied and will have much control of spray. This will not cause overspray.


“How long should I wait for the coating to be cured?”

One of the major benefits of Adam’s Graphene Ceramic Spray Coating is that its ease of use, longer working time, and the faster curing process. Adam’s Graphene Ceramic Spray Coating is dispensed through a sprayer, it starts curing as soon as you its sprayed and the product flows onto the towel. Once it’s applied to the painted surface or any surface intended for treatment it will show rainbow color for 1-2 minutes, then remove with a premium microfiber towel. After the coating is applied, you need to keep it safe and element-free for about 3-4 hours.



What happens if I forget a particular spot or end up with a high-spot?

If I forget a spot and you can remove it within 10 – 20 minutes. After that you can simply reapply to that effected area and wipe it off after 1-2 minutes. If this is left on for longer period then its recommended to use Brilliant Glaze and a microfiber applicator or machine polishing with Polish to fully remove this imperfection.



Starting Price: AED 1500 to 3000

Installation Time

2 working day for the installation


12 – 15 Months of Ceramic Protection

System X Car Polish Services on 050 643 6044 /  050 643 2144 book your appointment online